AEG LB 4713 BT - Device Operation; Power On;Off

English
49
Ifthedeviceshavebeensuccessfullypaired,theindicatorlampbrieyashesrapidlyand
then slowly.
NOTE:
• Dependingonthedevicemanufacturer,youneedtoperformtheregistration(PAIR-
ING) again to connect the devices.
• TheBluetoothcompatibilitycannotbeensuredfordevices(e.g.mobilephones)get-
ting released in the future.
• Toensureanoptimalconnection,makesurethatthebatteryofyourplayeriscom-
pletely charged.
• Someofthemobilephonebrandshaveanenergy-savingmode.Deactivatethe
energy-saving mode as it can otherwise result in problems during the data transfer
through Bluetooth.
• Tobeabletotransferaudiodata,Bluetoothneedstostayactivatedinyourplayer.
Observe the operation manual of your player.
• Ifamobilephoneonwhichyouareplayingmusicreceivesacall,themusicwillbe
interrupted. The sound however is not played back via the speaker.
Operation
The device is equipped with multi functional buttons. For different functions press the
respectivebuttonbrieyorpressandhold.
On/Off (4)
• Toswitchtheuniton,slidetheON/OFFswitchto“ON”.
NOTE: Automatic connection
If supported by your player (e.g. mobile phone), the devices will be connected auto-
matically. The prerequisite for this is:
• Thedeviceswerealreadyconnectedwitheachother.
• Bluetoothisactivatedinyourplayer.
• Toswitchtheunitoff,settheON/OFFswitchto“OFF”.Theunitsaredisconnected.
NOTE:
To save the battery, switch off the speaker when not in use.