AEG LB 4713 BT - Playback Control; Maintenance and Cleaning

English
50
Pause (1)
• Brieypressthebuttontopauseplayback.
• Pressthebuttonagaintocontinueplayback.
NOTE:
Depending on the device manufacturers, models, and software versions you need to
start the music playback in your player.
Adjust Volume (2/3)
Press the
VOL+ (2) and VOL
▬
(3) buttons to adjust the desired volume step by step.
NOTE:
• Ifthemaximumvolumehasbeenreachedonthespeaker,abeepwillsound.
• Increasethevolumeonyourplayer.
• Thevolumeontheplaybackunitmustnotbesettoolow,otherwisestaticmayoccur.
• Musiccanstillbeheardonthelowestpossiblevolumesettingontheunit.Thisisnot
a fault on the unit.
Select Music (2/3)
• Keepthe
VOL+(4)buttonpressedtoselectthenexttrack.
• Keepthe VOL
▬
(9) button pressed to select the previous track.
NOTE:
Your player must support this function.
Maintenance and Cleaning
CAUTION:
Neverimmersetheunitinwater!
• Therearenopartsinsidethedevicewhichcanbemaintainedbytheuser.
• Cleanthespeakerwithaslightlydampclothwithoutcleaningagent.