EasyManua.ls Logo

AEG LFN8E8436C - Page 31

AEG LFN8E8436C
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
read the next paragraph 'Configuring
the appliance wireless connection'.
4. Start the application. Select the
country and language and login with
Your email and password. If you do
not have an account, create a new
one following the instructions in My
AEG Care.
5. Follow the instructions on the App for
the appliance registration and
configuration.
9.2 Configuring the washing
machine wireless connection
1. Press the On/Off button for a few
seconds to activate the appliance.
Wait about 10 seconds before
proceeding with wireless
configuration.
2. Select a programme by turning the
programme dial.
3. Press and hold the Delay Start and
the Time Save buttons
simultaneously for a few seconds
until a 'click' sounds. Release the
buttons. appears on the display
for 5 seconds and the indicator
starts blinking.
The wireless module begins starting up.
Make sure that you APP is
ready for connection.
4. After about seconds, (Access
Point) appears on the display.
The access point will be open for about 3
minutes.
As long as the appliance is
activated, it will keep trying
to connect with saved
credentials until the Wi-Fi is
deactivated or resets the
credentials.
5. Configure the "My AEG" app on your
smart device and follow the
instructions to connect the appliance
to your Wi-Fi network.
6. If the connectivity is configured, when
the programme information screen
returns, the indicator is on the
display.
To switch the wireless connection off,
press and hold the Delay Start and the
Time Save buttons simultaneously for a
few seconds until the first acoustic
signal. Release the buttons.
appears on the display for 5 seconds.
If you switch the appliance
off and on again, the
wireless connection is
automatically off.
To remove the wireless credentials,
press and hold the Delay Start and the
Time Save buttons simultaneously for 10
seconds until the second acoustic signal:
appears on the display.
9.3 Remote Start
The Remote Start enables you to start a
cycle in remote control.
The Remote Control
activates automatically when
you press the Start / Pause
button to start the
programme, but it is also
possible to start a washing
programme remotely.
ENGLISH 31

Related product manuals