EasyManuals Logo

AEG LFR6114O2B User Manual

AEG LFR6114O2B
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
3. Press and hold the Manchas/Pre-
Lav. and Fácil Plancha/Engomar
buttons for some seconds (within 10
seconds after the switching on. After
these 10 seconds, the key
combination activates and
deactivates the acoustic signals).
4. After 3 seconds the total hours
operated by the appliance are shown
in the display: e.g. 1276 hours, the
display shows the text Hr for 2
seconds, 12 (thousands and
hundreds) for 2 seconds and 76 (tens
and units).
If the procedure does not
work (due to timeout, wrong
programme dial position or
wrong keys combination),
switch the appliance off and
repeat sequence from the
beginning.
10.4 Factory Reset
This function allows to restore the factory
default options. To activate this option
follow steps below:
1. Switch the appliance on by pressing
On/Off button.
2. Turn the programme knob to the third
programme.
3. Press and hold the Manchas/Pre-
Lav. and Fácil Plancha/Engomar
buttons for some seconds (within 10
seconds after the switching on. After
these 10 seconds, the key
combination activates and
deactivates the acoustic signals).
4. The display will show for
about 5 seconds.
If the procedure does not
work (due to timeout, wrong
programme dial position or
wrong keys combination),
switch the appliance off and
repeat sequence from the
beginning.
11. BEFORE FIRST USE
1. Make sure that all transit bolts have
been removed from the appliance.
2. Make sure that the electrical power is
available and the water tap is open.
3. Pour a small quantity of detergent
into the compartment marked .
4. Set and start a programme for cotton
at the highest temperature without
any laundry in the drum.
This removes all possible dirt from the
drum and the tub.
12. DAILY USE
WARNING!
Refer to Safety chapters.
12.1 Activating the appliance
1. Connect the mains plug to the mains
socket.
2. Open the water tap.
3. Press the On/Off button for a few
seconds to activate the appliance.
A short tune sounds. The appliance
automatically proposes a default
programme. The relevant indicator
illuminates.
The display shows the maximum load,
the default temperature, the default spin
speed, the indicators of the phases
making up the programme and the cycle
duration.
12.2 Loading the laundry
1. Open the appliance door.
2. Shake the items before you put them
in the appliance.
3. Put the laundry in the drum, one item
at a time.
www.aeg.com22

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AEG LFR6114O2B and is the answer not in the manual?

AEG LFR6114O2B Specifications

General IconGeneral
Door typeTempered glass
Door hingeLeft
Cord length1.8 m
Drum volume68.6 L
Control typeRotary
Display typeLED
Door openingSide opening
Loading typeFront-load
Product colorWhite
Built-in displayYes
Appliance placementFreestanding
Connected load2200 W
AC input voltage230 V
AC input frequency50 Hz
Energy efficiency scaleA to G
Water consumption per cycle52 L
Energy consumption washing per cycle0.512 kWh
Drum capacity10 kg
Cycle time (max)230 min
Spin-drying classB
Maximum spin speed1400 RPM
Noise level (spin)76 dB
Noise level (wash)- dB
Number of washing programs-
Automatic dosing systemNo
Weight and Dimensions IconWeight and Dimensions
Depth636 mm
Width597 mm
Height847 mm

Related product manuals