What to do if my AEG LFX6G7434BI does not drain water?
If your AEG Washer isn't draining water, check these items: ensure the drain hose has no kinks or bends and is correctly connected. Also, make sure the drain filter isn't clogged—clean it if necessary. If you selected a programme without a drain phase or an option that ends with water in the tub, set the drain programme.
How to fix AEG LFX6G7434BI not filling with water?
If your AEG Washer isn't filling with water properly, make sure the water tap is open and the water supply pressure isn't too low (contact your local water authority for pressure information). Also, ensure the water tap isn't clogged, the inlet hose has no kinks, damages, or bends, and the water inlet hose is correctly connected. Check that the filters of the inlet hose and valve are not clogged, and the sink spigot is not clogged.
Why is my AEG LFX6G7434BI Washer spin cycle not working or taking too long?
If the spin phase of your AEG Washer isn't working or the cycle is taking longer than usual, try these solutions: set the spin programme. Ensure the drain filter isn't clogged and clean it if needed. If there are balance problems, manually adjust the items in the tub and restart the spin phase.
How to reduce unusual noise and vibration in my AEG LFX6G7434BI?
To reduce unusual noise and vibration in your AEG Washer, ensure the appliance is correctly leveled. Also, verify that all packaging and transit bolts have been removed.
What to do if the AEG LFX6G7434BI door is open or not closed correctly?
If the AEG Washer door is open or not closed correctly, make sure that the door is properly closed.
Why won't my AEG Washer programme start?
Several factors can prevent your AEG Washer programme from starting. Ensure the mains plug is correctly connected to the socket, the appliance door is fully closed, and there is no damaged fuse in the fuse box. Also, check that you've touched the Start/Pause button. If a delay start is set, either cancel it or wait for the countdown. Deactivate the Child Lock if it's active. Verify the programme knob is correctly positioned and the drain hose isn't positioned too low.
How to stop my AEG LFX6G7434BI Washer from leaking water on the floor?
To prevent water from leaking onto the floor from your AEG Washer, check that the water hose couplings are tight and not leaking. Also, inspect the water inlet and drain hoses for any damage.
Why are the washing results not satisfactory with my AEG LFX6G7434BI?
If you're not satisfied with the washing results from your AEG Washer, make sure you're using the correct detergent in the correct quantity. Also, ensure that a washing programme that ends with water in the tub hasn't been selected and that the washing programme is fully finished.
Why are there detergent residues in the dispenser drawer of my AEG LFX6G7434BI Washer after washing?
If you find detergent residues in the dispenser drawer of your AEG Washer after a washing cycle, make sure the flap is in the correct position (UP for powder detergent, DOWN for liquid detergent). Also, ensure you're using the detergent dispenser according to the instructions in the user manual.
What to do if the mains supply is unstable for my AEG Washer?
If the mains supply is unstable, wait until it stabilizes. If the issue persists, disconnect the appliance, close the water tap, and contact an authorized service center.
General| Built-in | Yes |
|---|---|
| Capacity | 7 kg |
| Energy Efficiency Class | A+++ |
| Spin Speed | 1400 rpm |
| Noise Level (Wash) | 49 dB |
| Colour | White |
| Programmes | 15 |
| Delay Start | Yes |
| Child Lock | Yes |
| Water Consumption | 9900 L/year |
To Next Page
