What to do if my AEG Washer does not drain the water?
If your AEG Washer isn't draining, ensure the drain hose isn't kinked or bent, the drain filter isn't clogged (clean if needed), and the drain hose connection is correct. Also, make sure you have set the drain programme if you set a programme or an option which ends with water in the tub.
Why AEG Washer is not filling with water properly?
Your AEG Washer might not be filling properly because the water tap isn't open, the water supply pressure is too low (contact your local water authority for information), the water tap is clogged, the inlet hose is kinked or damaged, the water inlet hose connection is incorrect, the inlet hose filter or valve filter is clogged (refer to 'Care and cleaning'), or the sink spigot is clogged. Make sure to check each of these to resolve the issue.
Why my AEG LFX6G8434BI spin phase does not operate?
The spin phase of your AEG Washer might not be working because you haven't set the spin programme, the drain filter is clogged (clean it if necessary), or there are balance problems. To fix this, set the spin programme, clean the drain filter, and manually adjust the items in the tub before restarting the spin phase.
Why AEG LFX6G8434BI Washer appliance makes an unusual noise and vibrates?
If your AEG Washer is making unusual noises and vibrating, ensure it is correctly leveled and that all packaging and transit bolts have been removed.
What to do if the AEG Washer appliance door is open or not closed correctly?
Make sure that the door of your AEG Washer is properly closed.
Why AEG LFX6G8434BI programme does not start?
The AEG Washer programme might not start because the mains plug isn't connected, the door isn't closed properly, there's a damaged fuse, the Start/Pause button hasn't been touched, a delay start is set, the Child Lock is on, the knob isn't on the selected program, or the drain hose is incorrectly positioned.
What to do if there is water on the floor near my AEG Washer?
If you find water on the floor near your AEG Washer, check that the water hose couplings are tight and not leaking, and that the water inlet and drain hoses are not damaged.
What to do if my AEG LFX6G8434BI fills with water and drains immediately?
If your AEG Washer fills and drains immediately, set the drain or spin programme if there is water in the drum. Also, ensure the appliance is receiving electrical power. If the issue persists, it may indicate a failure, and you should contact an Authorised Service Centre.
Why AEG Washer washing results are not satisfactory?
If your AEG Washer isn't cleaning clothes well enough, ensure you're using the correct detergent in the right amount and that a programme ending with water in the tub hasn't been selected. Also, make sure the washing programme has finished. For stubborn stains, try increasing the detergent, using special stain removal products, and setting the correct temperature. Avoid overloading the machine and ensure the detergent dispenser flap is correctly positioned for the type of detergent used.
Why AEG LFX6G8434BI Washer programme duration increases or decreases?
The AEG Washer programme duration may change because the ProSense System adjusts the time based on the laundry load size and type.
General| Model | LFX6G8434BI |
|---|---|
| Type | Front Load Washer |
| Load Capacity | 8 kg |
| Energy Efficiency Class | A+++ |
| Spin Speed | 1400 RPM |
| Color | White |
| Delay Start | Yes |
| Child Lock | Yes |
To Next Page
