Electrical connection Voltage
Overall power
Fuse
Frequency
230 V
2200 W
10 A
50 Hz
Level of protection against ingress of solid particles
and moisture ensured by the protective cover, ex‐
cept where the low voltage equipment has no pro‐
tection against moisture
IPX4
Water supply
1)
Cold water
Water supply pressure Minimum
Maximum
0.5 bar (0.05 MPa)
10 bar (1.0 MPa)
Ambient temperature Minimum
Maximum
5 °C
35 °C
Maximum wash load Cotton
Synthetics
Wool
10.0 kg
4.0 kg
1.5 kg
Maximum dry load Cotton
Synthetics
Wool
6 kg
4 kg
1 kg
Spin Speed Maximum spin speed 1551 rpm
This product contains HFC - R134a/GWP1430 0.14 kg fluorinated gas hermetically
sealed.
1)
Connect the water inlet hose to a water tap with a 3/4'' thread.
5. INSTALLATION
WARNING!
Refer to Safety chapters.
5.1 Unpacking
WARNING!
Remove all the packaging
and the transit bolts before
installing the appliance.
WARNING!
As you will put down the
appliance on the rear side,
wait about 6 hours before
you use it. This time is
necessary to enable the
compressor to work
properly.
WARNING!
Use the gloves.
1. Remove the external film. If
necessary, use a cutter.
2. Remove the cardboard top and the
polystyrene packaging materials.
www.aeg.com10
To Next Page
Loading...
