AEG LWR98C166X - Opening the door - Adding garments; End of the programme

12.11 Interrupting a
programme and changing the
options
When the programme is running, you
can change only some options:
1. Touch the Départ/Pause button.
The related indicator flashes.
2. Change the options. The given
information in the display changes
accordingly.
3. Touch the Départ/Pause button
again.
The washing programme continues.
12.12 Cancelling a running
programme
1. Press the Marche/Arrêt button to
cancel the programme and to
deactivate the appliance.
2. Press the Marche/Arrêt button again
to activate the appliance.
Now, you can set a new washing
programme.
If the ProSense phase is
already carried out and the
water filling is already
started, the new programme
starts without repeating the
ProSense phase. The water
and the detergent are not
drained out in order to avoid
waste.
12.13 Opening the door -
Adding garments
While a programme or the delay start
operates, the appliance door is locked.
If the temperature and level
of the water in the drum are
too high and/or the drum still
rotates you cannot open the
door.
1. Touch the Départ/Pause button.
In the display the related door lock
indicator goes off.
2. Open the appliance door. If
necessary, add or remove the items.
3. Close the door and touch the Départ/
Pause button.
The programme or the delay start
continues.
4. The door can be opened when the
programme is complete. You may
also set a spinning or draining
programme/option and than press
Départ/Pause button. If the spin and
drain programmes are not available
in the programme dial, they can be
set via App.
12.14 End of the programme
When the programme has finished, the
appliance stops automatically. The
acoustic signals operate (if they are
active).
In the display all washing phase
indicators become steady and the time
area shows .
The indicator of the Départ/Pause button
goes off.
The door unlocks and the indicator
goes off.
1. Press the Marche/Arrêt button to
deactivate the appliance.
After five minutes from the end of the
programme, the energy saving function
automatically deactivates the appliance.
When you activate the
appliance again, the display
show the end of the last
selected programme. Turn
the programme dial to set a
new cycle.
2. Remove the laundry from the
appliance.
3. Make sure that the drum is empty.
4. Keep the door and the detergent
dispenser slightly ajar to prevent
mildew and odours.
5. Close the water tap.
12.15 Draining water out after
end of cycle
If you have chosen a programme or an
option that does not empty out the water
of the last rinse, the programme is
completed, but:
ENGLISH 35