AEG MBB1755SEM - Page 59

59
ENGLISH
2.2 Installing the appliance
1. Remove all packaging and check
carefully for any signs of damage.
2. This oven is designed to 󰘰t into a
350 mm high cupboard as standard.
When 󰘰tting into a 360 mm high
cupboard:- Unscrew and remove the
4 feet from the bottom of the oven.
Rotate the feet 90 degrees and re󰘰t with
the long side to the front of the oven.
3. Fit the 󰘰xing hook to the right hand
side of the kitchen cupboard using the
instruction sheet supplied.
4. Fit the appliance into the kitchen
cupboard slowly, and without force. The
appliance should be lifted onto the 󰘰xing
hook and then lowered into place. Fix the
oven on the left hand side using the two
screws provided.
5. Ensure the appliance is stable and not
leaning. Ensure that a 2.5 mm gap is
kept between the cupboard door above
and the top of the frame (see diagram).
2.5 mm
2.5 mm
4 mm
4 mm
3 - AEG_EN230_CS_BASE_AL28UICTO_SAFETYMAY19.indd 593 - AEG_EN230_CS_BASE_AL28UICTO_SAFETYMAY19.indd 59 06/04/2023 07:50:4006/04/2023 07:50:40