EasyManua.ls Logo

AEG MBE2658S - 9.2 Connecting to Power Supply; 9.3 Electrical Connection Safety

AEG MBE2658S
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
52
www.aeg.com
The electrical outlet should be readily
accessible so that the unit can be
unplugged easily in an emergency. Or
it should be possible to isolate the oven
from the supply by incorporating a
switch in the fixed wiring in accordance
with the wiring rules.
The socket should not be positioned
behind the cupboard.
The best position is above the
cupboard, see (A).
Connect the appliance to a single
phase 220-240 V/50 Hz alternating
current via a correctly installed earth
socket. The socket must be fused with
a 10 A fuse.
The power supply cord may only be
replaced by an electrician.
Before installing, tie a piece of string to
the power supply cord to facilitate
connection to point (A) when the
appliance is being installed.
When inserting the appliance into the
high-sided cupboard, DO NOT crush
the power supply cord.
Do not immerse the power supply cord
or plug in water or any other liquid.
(A)
9.2 Connecting the appliance to
the power supply
WARNING!
THIS APPLIANCE MUST BE
EARTHED
The manufacturer declines any liability
should this safety measure not be
observed.
If the plug that is fitted to your appliance is
not suitable for your socket outlet, you
must call your authorised ELECTROLUX
service agent.
9.3 Electrical connections
2_AEG16_EN230_MS_BASE_AL28_Layout 1 29/06/2016 11:50 Page 52

Table of Contents

Related product manuals