AEG PS?254?L User Manual

19
GB
TECHNICAL DATA
Mitresaw*
PS 254 L
Production code 4406 71 01...
4406 81 01...
... 000001-999999
Rated input 220-240 V, 50 HZ, S6(40%),
2000 W, 8,3 A
No-load speed 4500 min
-1
Saw blade dia. x hole dia 254 x 30 mm
Saw blade thickness 1,8 mm
Max. cutting width
Mitre 0°/ Bevel 0°
Mitre 45°/ Bevel 0°
Mitre 0°/ Bevel 45°
Mitre 45°/ Bevel 45°
90 x 305 mm
90 x 215 mm
50 x 305 mm
50 x 215 mm
Max. height
Mitre 0°/ Bevel 0°
Mitre 45°/ Bevel 0°
90 x 305 mm
90 x 215 mm
Min. workpiece dimensions 130 x 35 x 2,5 mm
Weight according EPTA-Procedure 01/2003 19,5 kg
Noise/Vibration Information
Measured values determined according to EN 61029.
Typically, the A-weighted noise levels of the tool are:
Sound pressure level (K=3dB(A))
Sound power level (K=3dB(A))
Wear ear protectors!
97,3 dB (A)
110,3 dB (A)
Total vibration values (vector sum in the three axes) determined according to EN 61029.
Vibration emission value a
h
Sawing of wood
Uncertainty K=
2,4 m/s
2
1,5 m/s
2
*PS
=
^
Mitresaw
WARNING
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 61029
and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for dierent applications,
with dierent accessories or poorly maintained, the vibration emission may dier. This may signicantly increase the exposure level over
the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched o or when it is running
but not actually doing the job. This may signicantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the eects of vibration such as: maintain the tool and the accessories,
keep the hands warm, organisation of work patterns.
English

AEG PS?254?L Specifications

General

Input power	2000 W
Power source	AC
Blade diameter	254 mm
Idle speed (max)	4500 RPM
Miter setting (left)	50 °
Cutting depth (max)	90 mm
Cutting capacity 0°	305 mm

Weight and Dimensions

Weight	19500 g