Need help?Do you have a question about the AEG PS254DB and is the answer not in the manual?
Provides specifications like power, weight, dimensions, and safety values measured according to EN 62841.
Lists part numbers for essential components like saw blade, combination wrench, and dust bag.
Emphasizes reading instructions and wearing hearing protection due to noise emissions.
Covers work area, electrical, and personal safety precautions to prevent injury.
Provides specific safety advice for operating mitre saws, including workpiece support and blade safety.
Details safe handling, installation, and use of saw blades, including guards and specifications.
Defines intended use, operator requirements, environmental conditions, and residual hazards.
Guides on unpacking, releasing the saw arm, and initial inspection.
Covers mounting to workbench, stands, and installing components like fences and the blade.
Details on adjusting mitre lock, mitre lock lever, and squaring the blade to the fence.
Steps to calibrate the bevel angle mechanism and adjust the mitre lock lever.
General operation guidelines, safety during cutting, and LED lighting system use.
Instructions for non-sliding, mitre, cross, bevel, and slide cuts.
Guides on compound mitre cuts and techniques for specific workpiece types.
Covers auxiliary fences, supporting workpieces, dadoes, and crown molding.
Details on using crown stops and the setting lever for crown and baseboard molding.
Instructions for cutting base molding and warped material.
Guidance on safely storing and transporting the mitre saw.
Covers general maintenance, repairs, and the importance of using authorized service centers.
To Next Page
General
