AEG PS254DB User Manual

13
13
TECHNICAL DATA SLIDING COMPOUND MITRE SAW
PS254DB
Rated input 220V - 240V ~ 50 Hz
Rated current 7.5 A
Rated power 1800 W
Weight 24.6 kg
Maximum cutting depth 89 mm
No-load speed 4800 min
-1
Saw blade diameter x hole diameter 254 x 30 mm
Saw blade thickness / kerf 1.8 mm / 2.5 mm
Maximum cutting capacity
Mitre 0°/ Bevel 0° Hi-capacity 89 mm x 305 mm
Mitre 45°/ Bevel 0° 89 mm × 203 mm
Mitre 0°/ Bevel 45° (left) 51 mm × 305 mm
Mitre 0°/ Bevel 45° (right) 38 mm × 305 mm
Mitre 0°/ Bevel 48° (left) 38 mm × 305 mm
Mitre 0°/ Bevel 48° (right) 19 mm × 305 mm
Mitre 45°/ Bevel 45° (left) 51 mm × 203 mm
Mitre 45°/ Bevel 45° (right) 38 mm × 203 mm
Mitre 45°/ Bevel 48° (left) 38 mm × 203 mm
Mitre 45° (left) / Bevel 48° (right) 19 mm × 203 mm
Mitre 70°/ Bevel 0° 38 mm × 102 mm
Vertical Base (laid flat on turning table)
Mitre 45°/ Bevel 0° 153 mm × 19 mm
Nested Crown (laid flat on turning table)
Mitre 45°/ Bevel 0° 168 mm
Maximum mitre angle 70°
Maximum bevel angle 48°
Minimum workpiece dimensions 215 mm × 35 mm × 2.5 mm
Measured values determined according to EN 62841
A-weighted sound pressure level
L
pA
= 95.2 dB(A)
Uncertainty K K = 3 dB(A)
Measured values determined according to EN 62841
A-weighted sound power level
L
wA
= 108.1 dB(A)
Uncertainty K K = 3 dB(A)
WARNING!
The declared noise emission value(s) have been measured in accordance with a standard test method of EN 62841-1 and EN 62841-3-9, and
may be used for comparing one tool with another.
The declared noise value(s) may also be used in a preliminary assessment of exposure.
The noise emissions during actual use of the power tool can dier from the declared values depending on the ways in which the tool is used
especially what kind of workpiece is processed.
Identify safety measures to protect the operator based on an estimation of exposure in the actual conditions of use (taking account of all parts
of the operating cycle such as the times when the tool is switched o and when it is running idle in addition to the trigger time).
Wear hearing protection. Exposure to noise can cause hearing loss.
REPLACEMENT PARTS
Saw blade 089315001009
Combination wrench 089240013065
Work clamp 089315001301
Dust bag 089315001302
Throat plate 089240013085
Crown stop 089041028721
Brush 089041028055

AEG PS254DB Specifications

General

Brand	AEG
Model	PS254DB
Category	Saw
Language	English