EN -13-
The condenser of your fridge is placed at the bottom of cabinet. As a result of that, assemble
the spacer by xing it to holes on the cover bottom panel and turn 90° that’s shown below
gure for arranging the distance between the refrigerator and the back wall at where you
place the fridge. You can move the fridge towards the back wall until that point.
Plastic for distance setting
• The distance between the appliance and back wall must be minimum 42mm and
maximum 75mm.
Before Using your Fridge
• When using your fridge for the rst time, or after transportation, keep it
in an upright position for at least 3 hours before plugging into the mains.
This allows efcient operation and prevents damage to the compressor.
• Your fridge may have a smell when it is operated for the rst time. This is normal and
the smell will fade away when your fridge starts to cool.
Internal lighting
WARNING!
Risk of electric shock.
• Concerning the lamp(s) inside this product and spare part lamps sold separately: These
lamps are intended to withstand extreme physical conditions in household appliances,
such as temperature, vibration, humidity, or are intended to signal information about the
operational status of the appliance. They are not intended to be used in other applications
and are not suitable for household room illumination.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
