Insert~n~‘toolk.‘
.:::,1:,:
The chuck can be used for drill bits or
screwdriver bits. For this purpose, open
the chuck, insert the selected bit and
.
^
secure by tightening the chuck with the
:>.,~~.~,-;:.
chuck
key.
.,
-:.”
To remove tools insert chuck key into one
...
_^”
of the three holes at the chuck month and
_
,,..
_..._
In__
turn anti- clockwise.
.,
_
_..
,.
Direct
.reception
.,
Screwdriver bits can be inserted directly
of screwdriver
‘2.
‘into the working spindle. This results in
bib..
-.
(Depending
on.
i
_’
‘+:Y:”
the following advantages:
”
..”
._...
Screwdriver bits can be exchanged easier
’
,‘._
:
and
quicker
Better view at the screw fitting.
The weight of the machine is reduced
.when
not working with the chuck.
Positioning the
__.
The additional handle can be positioned as
additional
..
-.
...--..
required. Loosen the clamping by twisting
handle..
..
..
~‘:.::.::~
.I
(Wending
on
..,..
,.
.the
additional handle, bring the additional
equipment)
j
.)_
handle into the required position and
;re-fasten
the handle.
~:~:,$~~:C~
For drilling at the same depth push depth
L
.,.X
‘...‘.-
...
gauge into the hole in the handle, set the
To Next Page
Loading...
