5 cm
min.
200 cm
2
min.
200 cm
2
CAUTION!
Refer to the assembly
instructions for the
installation.
4. OPERATION
4.1 Control panel
1
Temperature indicator LED
2
FROSTMATIC indicator LED
3
FROSTMATIC button
4
Temperature regulator
ON/OFF button
4.2 Switching on
1. Insert the plug into the wall socket.
2. Touch the temperature regulator
button if all LED indicators are off.
4.3 Switching off
Keep touching the temperature
regulator button for 3 seconds.
All indicators light off.
4.4 Temperature regulation
To operate the appliance, touch the
temperature regulator until the LED
corresponding to the required
temperature lights up. Selection is
progressive, varying from 2°C to 8°C.
Coldest setting: +2°C.
Warmest setting: +8°C.
A medium setting is
generally the most suitable.
Choose the setting keeping in mind that
the temperature inside the appliance
depends on:
• room temperature
• frequency of opening the door
• quantity of food stored
• appliance location.
1. Touch temperature regulator.
Current temperature indicator blinks.
Any time you touch the temperature
regulator, the setting moves by one
position. The corresponding LED blinks
for a while.
ENGLISH
7
To Next Page
Loading...
Need help?
General
