EasyManua.ls Logo

AEG SCT81900S0 - Temperature and Function Control; Temperature Indicators; Temperature Regulation; DynamicaIR Function

AEG SCT81900S0
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Each time one of the two buttons is
pressed again the temperature is adjus-
ted by 1°C. The set temperature will be
reached within 24 hours.
TEMPERATURE INDICATORS
The temperature indicators show several
information:
During normal operation, the tempera-
ture currently set for fridge and freezer
are displayed.
When the temperature is being adjus-
ted a flashing display indicates the
fridge/freezer temperature currently
set.
TEMPERATURE REGULATION
To operate the appliance, proceed as fol-
lows:
1.
Set the required temperature by
pressing the corresponding tempera-
ture regulator. The temperature indi-
cator will immediately show the
changed setting and the temperature
indicator flashes.
2.
Each time the temperature regulator
is pressed the temperature is adjus-
ted by 1 °C. The set temperature will
be reached within 24 hours.
3.
The temperature indicator will change
from flashing to continuous illumina-
tion.
For a correct storage of the food the fol-
lowing temperatures should be set:
+5 °C in the fridge
-18 °C in the freezer.
When the setting is changed, the
compressor does not start imme-
diately if automatic defrosting is
currently taking place. As the stor-
age temperature within the fridge
is reached quickly you can store
food immediately after switching
on.
DYNAMICAIR FUNCTION
To switch on the function:
1.
Press the DYNAMICAIR button.
2.
The DYNAMICAIR indicator is shown.
To switch off the function:
1.
Press the DYNAMICAIR button.
2.
The DYNAMICAIR indicator goes off.
If the function is activated auto-
matically the DYNAMICAIR indica-
tor is not shown (refer to "Daily
use").
The activation of the DYNAMI-
CAIR function increases the ener-
gy consumption.
COOLMATIC FUNCTION
The COOLMATIC function is suitable for
quick cooling of large quantities of goods
in the refrigerator.
To activate the function, do these steps:
1.
Press the Fridge Temperature - but-
ton (several times if necessary) until
the word “SC” appears in the display.
A temperature of +2°C is automati-
cally selected.
To deactivate the function, do these
steps:
1.
Press the Fridge Temperature + but-
ton .
The COOLMATIC function stops
automatically after about 6 hours.
If the COOLMATIC function is switched
on the temperature setting may not be
changed.
HOLIDAY FUNCTION
This function allows you to keep the re-
frigerator shut and empty during a long
holiday period (e.g. the summer holidays)
without the formation of a bad smell.
The fridge compartment must be
empty when the holiday function
is on.
To activate the function:
1.
press continuously the temperature
regulator (+ button) until the letter
"H" (Holiday) appears on the temper-
ature indicator. The Holiday function
sets the temperature approx +15°C.
The refrigerator is in the energy-sav-
ing mode.
To deactivate the function:
1.
set the required temperature by
pressing the fridge temperature regu-
lator.
8
www.aeg.com

Related product manuals