Need help?Do you have a question about the AEG SCT51800S0 and is the answer not in the manual?
General| Brand | AEG |
|---|---|
| Model Number | SCT51800S0 |
| Category | Refrigerator |
| Noise Level | 39 dB |
| Number of Doors | 2 |
| Defrost System | Frost Free |
| Climate Class | SN-T |
| Color | Stainless Steel |
| Type | Fridge Freezer |
Safety guidelines for children and vulnerable individuals regarding appliance use and disposal.
General safety warnings and precautions for operating the appliance, including ventilation and refrigerant handling.
Instructions and warnings for the safe and efficient daily operation of the appliance.
Troubleshooting steps for when the appliance and its lamp are not functioning.
Recommendations for choosing an installation location based on ambient temperature and climate class.
Instructions for safely connecting the appliance to the power supply, emphasizing earthing.
Specifications for adequate airflow around the appliance to prevent overheating.
Final steps and precautions for installing the appliance, ensuring cable freedom.
Detailed steps for installing the appliance within a niche, including alignment and gap covers.
Instructions for fine-tuning the appliance's position within the niche for correct alignment and clearance.
Instructions for securing the appliance to the niche using screws.
Instructions for connecting the appliance laterally to a kitchen furniture door.
Steps for mounting a specific part (Ha) on the interior of the kitchen furniture.
Instructions for connecting component Hc to component Ha.
Steps for aligning appliance and furniture doors for the next connection phase.
Procedure for marking drilling points by aligning the appliance and furniture doors.
Marking the precise position for fitting a nail (K) on the door edge.
Securing a component (small square) to its guide using screws.
Adjusting component Hb to align the appliance and furniture doors correctly.
Connecting component Hd to component Hb.
Final checks for correct installation, including screw tightening and door operation.
To Next Page
