EasyManua.ls Logo

AEG SFE5822VAF - Technical Data

AEG SFE5822VAF
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8.2 Replacing the lamp
The appliance is equipped
with a long-life LED interior
light.
It is strongly recommended
to use original spare parts
only.
Use LED bulbs (E14 base)
only. The maximum power is
shown on the lamp unit.
CAUTION!
Disconnect the plug from
the mains socket.
1. Using a screwdriver, remove the
screw from the lamp cover.
2. Detach the lamp cover in the
direction of the arrows.
3. Replace the lamp with the one that
has identical characteristics and is
specifically designed for household
appliances.
4. Reassemble the lamp cover.
5. Tighten the screw to the lamp cover.
6. Connect the plug to the mains
socket.
7. Open the door.
Make sure that the light switches on.
8.3 Closing the door
1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to
assembly instructions.
3. If necessary, replace the defective
door gaskets. Contact the Authorised
Service Centre.
9. TECHNICAL DATA
9.1 Product information sheet
Trade Mark AEG
Model SFE5822VAF 933025070
Category 7. Refrigerator-freezer
Energy efficiency class A++
Energy consumption in kWh per year, based on
standard test results for 24 hours. The actual energy
consumption will depend on how the appliance is
used and where it is located
139
Storage volume in litres, Fridge 93
Storage volume in litres, Star 16
Storage volume in litres, Cellar zone -
www.aeg.com14

Related product manuals