To Next Page
C
campbellphillipAug 7, 2025
What to do if my AEG STM 7500 Blender does not switch on?
- AAndrew RamirezAug 7, 2025
If your AEG Blender isn't turning on, there are several things to check: * Ensure all components are correctly locked in place. * Verify the On/Off button is illuminated; if not, press it. * Make sure the jug isn't overfilled, exceeding the maximum level. * Check the plug connection to the outlet, or try a different outlet. * If there's a power outage, wait for it to end. If none of these steps work, there may be a functional problem, and you should contact authorized service.
General
