To Next Page
S
skingJul 28, 2025
What to do if my AEG SB4 Blender does not switch on?
- AarmstrongjacobJul 28, 2025
If your AEG Blender doesn't switch on, there are several potential reasons. First, ensure all components are correctly locked into position. Next, verify that the speed selector is set to the appropriate speed or the PULSE position if you intend to use the PULSE function. Also, make sure you haven't overfilled the jug beyond the maximum level. Check that the plug is securely connected to the power outlet, and try a different outlet if necessary. In case of a power outage, wait for the power to be restored. If none of these steps work, it may indicate a functional problem, and you should contact an authorized service.
General
