AEG T65178AV - Options

Programmes Type of load
Load (max.)
1)
/
Fabric mark
30 min
Time programme to dry individual items of
laundry.
1kg/
Auffrischen Refreshing textiles that were in storage. 1kg
Bettwäsche
Bed linen such as single and double sheets,
pillowcases, duvet cover.
2kg/
Jeans
Leisure clothing such as jeans, sweat-shirts
of different material thicknesses (e.g. at the
neck, cuffs and seams).
7kg/
Sportkleidung
Sportswear, thin and light fabrics, microfib-
er, polyester.
2kg/
Leichtbügeln
Easy care fabrics for which a minimum of
ironing is necessary. The drying results can
be different from one type of fabric to an-
other. Shake the items before putting them
in the appliance. When the programme has
ended, immediately remove the items and
put them on a hanger.
1kg (or 5 shirts)/
Wollepflege
Refreshing a wool fabrics. Wool items be-
come soft and cosy. Remove the items im-
mediately after the programme end.
1kg
1)
The maximum weight refers to dry items.
2)
For test institutes only: Standard programmes for tests are specified in the EN 61121 document.
3)
The
Baumwolle Schranktrocken ECO programme is the “Standard cotton programme” accord-
ing to Commission Regulation EU No. 392/2012. It is suitable for drying normal wet cotton laundry and it
is the most efficient programme in terms of energy consumption for drying wet cotton laundry.
7. OPTIONS
7.1 Schonen
With this option you can set a delicate
drying programme that has a low
temperature. Use this option with a
fabrics that have the symbol on the
fabric label (e.g. acrylic, viscose).
7.2 Sensitiv
To dry lightly of fabrics that are
frequently worn. Programme starts on full
heat setting, which is then decrease as
the programme continue to be lightly to
the laundry.
7.3 Knitterschutz
Extends the anti-crease phase by 60
minutes at the end of the drying cycle.
This function reduces creases. The
laundry can be removed during the anti-
crease phase.
7.4 Signal
The buzzer sounds at the:
• cycle end
• start and end of the anti-crease phase
• cycle interruption
The buzzer function is by default always
on. You can use this function to activate
or deactivate the sound.
ENGLISH
9