Problem
1)
Possible cause Remedy
Unsatisfactory
drying result.
Steam load too low. Extend the steam load.
Incorrect programme selection. Do the selection of the applicable
programme.
7)
Incorrect load/type of the cloths. Use applicable load/type of
clothes.
1)
If there is an error message on the display (e.g. E51): Turn the tumble dryer off and on. Select a new
programme. Touch the Start/Pause button. If the appliance does not operate contact the service centre
and provide the error code.
2)
Follow the programme description — see the PROGRAMMES chapter .
3)
See the
CARE AND CLEANING
chapter.
4)
Only dryers with the Dryness option.
5)
See the HINTS AND TIPS chapter .
6)
Note: After a maximum of 5 hours the drying cycle ends automatically.
7)
Follow the steam programme description.
12.1 Possible causes of
unsatisfactory drying results:
• The filter is clogged. Clogged filter
makes drying inefficient.
• The airflow slots are clogged.
• The humidity sensor is dirty.
• The drum is dirty.
• Inadequate default dryness level
settings. See chapter
Adjustment of
default dryness level
• Room temperature is too low or too
high. Optimal room temperature is
between 18°-25°C.
13. TECHNICAL DATA
Height x Width x Depth 850 x 596 x 636 mm (maximal 660 mm)
Max. depth with the appliance door open 1105 mm
Max. width with the appliance door open 958 mm
Adjustable height 850 mm (+ 15 mm - feet regulation)
Drum volume 118 l
Maximum load volume 9,0 kg
Voltage 230 V
Frequency 50 Hz
Sound power level 65 dB
Total power 1650 W
Energy efficiency class A++
ENGLISH 27
To Next Page
Loading...
