To Next PageTo Next Page
Need help?Do you have a question about the AEM SM56 AA9x series and is the answer not in the manual?
General| Brand | AEM |
|---|---|
| Model | SM56 AA9x series |
| Category | Recording Equipment |
| Language | English |
Overview of the manual's content covering product description, design features, and specifications.
Details the controller's function in managing aircraft audio and intercom systems.
Explains the physical and functional design aspects of the audio controller unit.
Covers electrical, physical, and environmental characteristics of the audio controller.
Details input power, signal levels, impedance, and output specifications.
Outlines dimensions, weight, mounting, materials, and connectors for the units.
Lists operating and survival temperature, humidity, and altitude limits.
Identifies and explains the various controls and indicators on the unit's faceplate.
Guides on unpacking, inspection, and installation procedures for the controller.
Steps for carefully unpacking and visually inspecting the equipment for damage.
Comprehensive steps for correctly installing the audio controller in an aircraft.
Critical safety precautions to be observed during the installation process.
Important notes and precautions to prevent damage during installation.
Specifies wire selection, routing, and termination for reliable system integration.
Details the specifications for push-to-talk cordsets for headset operation.
Procedures to verify correct operation after the unit is installed.
Guides on setting up internal and external connections and audio levels.
Adjusting audio levels for ALERT, Sidetone (S/T), and VOX sensitivity.
Adjusting audio levels for direct audio inputs and alert signal characteristics.
Lists available drawings for mechanical installation and connector mapping.
Outlines functional and operational procedures for using the audio controller.
Provides a general overview of the controller's audio management capabilities.
Explains the functions of various switches, controls, and indicators on the unit.
Describes how to select and control receive audio from different sources.
Details the operation of the switch for selecting transceivers and PA functions.
Explains the different modes (LIVE, KEYED, VOX) and general functions of the intercom.
Describes specific optional features like ICS ISO/PLT ISO, CALL, PAT, and TIE/SPLIT.
Explains the function of indicators for intercom isolation status.
Describes the indicator for an active intercom call.
Details how to signal for intercom connection restoration.
Allows selection of patient audio input to the crew.
Controls intercom audio sharing between multiple audio controllers.
Describes pilot isolation and direct radio connection during system faults.
Covers Direct Audio and Internal Alerting features for warnings and notifications.
Explains direct audio signals from external warning systems.
Describes internally generated tones for alerts and notifications.
