Need help?Do you have a question about the AEMC 275HVD and is the answer not in the manual?
General| Sensor Type | High Voltage Detector |
|---|---|
| Category | Security Sensors |
| Operating Frequency | 50/60 Hz |
| Audible Indication | Yes |
| Visual Indication | Yes |
| Power Source | Battery |
| Battery Type | 9V alkaline |
| Detection Method | Non-contact |
| Operating Temperature | -10°C to 55°C |
| Storage Temperature | -20°C to 70°C |
| Humidity | 95% RH non-condensing |
Explains standard symbols used on the instrument and in the manual.
Details procedures for checking shipment contents and reporting damage.
Lists catalog number and included accessories for the 275HVD.
Describes the Model 275HVD as a proximity-based high voltage detector.
Outlines common applications and the necessity of using a Hot Stick.
Details the specific features and components of the 275HVD model.
Specifies electrical properties such as ranges, frequency, and power requirements.
Details physical attributes like dimensions, weight, and durability tests.
Covers operating and storage conditions, including temperature and humidity limits.
Provides data on voltage detection ranges and distances for various settings.
Covers pre-operation checks, including inspection and battery condition.
Discusses operational constraints and potential issues with the detector.
Explains the procedure to verify the detector's functionality before use.
Provides instructions and warnings for testing high voltage environments.
Details the method for detecting lower voltage levels with the instrument.
Describes how to detect faults like open circuits in flexible cables.
Instructs on how to replace the batteries in the 275HVD detector.
Details the process for returning the instrument for warranty service.
To Next Page