Auto power off mode
After 2 minutes of operation, the device automatically turns off. You can turn
on the device again by pressing the button (10).
Maintenance
Replaceable toothbrush heads should be washed in running water at a
comfortable temperature for you, as shown in Figure d. Try not to completely
submerge the toothbrush head in water. Do not use aggressive or cleaning
agents when washing the attachment. It is allowed to treat the bristles of the
toothbrush head with a mouthwash from time to time. Any dirt on the handle
of the device and the charging station should be removed with a damp cloth,
as shown in figure d. Then you should carefully wipe the surface with a dry
cloth. For stubborn dirt, apply dishwashing liquid to a cloth to clean the handle
of the device. Remove any remaining moisture with a towel after washing.
NOTE. Perform maintenance on the device and its components only after
turning off the device and disconnecting the charging base from the mains.
Elimination of possible malfunctions
• The toothbrush does not turn on. Possible cause: The device battery is low.
Solution: charge the device for at least 5.5 hours.
• The device placed in the charging station does not charge. Possible
reasons: damage to the cord of the charging base, incorrect parameters of
To Next Page
Loading...
