Need help?Do you have a question about the Aeon Labs MultiSensor 6 and is the answer not in the manual?
General| Product Name | Aeon Labs MultiSensor 6 |
|---|---|
| Category | Accessories |
| Power Source | Battery or USB |
| Connectivity | Z-Wave |
| Light Sensor Range | 0 - 1000 Lux |
| Sensor Type | Motion, Light, Temperature, Humidity |
| Battery Life | Up to 2 years |
| Z-Wave Frequency | 908.42 MHz (US) |
| Range | Up to 100 meters outdoors |
| Temperature Sensor Range | -10°C to 50°C |
| Humidity Sensor Range | 0% to 100% |
| Operating Humidity | 0% to 80% |
| Certification | Z-Wave Plus |
| Operating Humidity (Alternative) | 0% to 100% |
| Motion Detection Range | Up to 20 feet (6 meters) |
| Operating Temperature | 14°F to 104°F (-10°C to 40°C) |
Details on SDK, library types, and supported Z-Wave command classes.
Identifies key components of the MultiSensor, including sensors and buttons.
Details the actions triggered by pressing the Z-Wave button, such as inclusion/exclusion.
Describes association groups, supported nodes, and data reporting behavior.
Provides manufacturer IDs, product types, and product IDs for device identification.
Details the command class for setting device configurations and parameters.
To Next Page
