Aeon Labs Z-Stick User Manual

Aeon Labs Z-Stick
(Z-Wave USB Adapter)

Aeon Labs Z-Stick Specifications

General

Connectivity technology	Wireless
Chipset	-
Internal	No
Product color	Black
Data link protocols	Zensys 5.02
Maximum data transfer rate	480 Mbit/s
USB powered	Yes
Wireless range	30 m
Channel bandwidth	868.42 MHz
Operating temperature (T-T)	-35 - 85 °C

Weight and Dimensions

Depth	69 mm
Width	28 mm
Height	14 mm

Summary

Introduction

Operating Instructions

Inclusion-Mode: Adding/Including Z-Wave Devices into the Z-Wave Network

Describes how to add Z-Wave devices to the network using the Z-Stick.

Removal-Mode: Deleting/Removing/Excluding Z-Wave Devices from the Z-Wave Network

Details the process for removing Z-Wave devices from the network.

SerialAPI-Mode and Other Functions

SerialAPI-Mode: Allowing a Host Processor To Take Control of the Z-Stick and Take Part in the Z-Wave Network

Explains how the Z-Stick integrates with a host processor for Z-Wave network control.

Other Functions

Covers factory reset, adding to existing networks, and firmware updates.

FCC Compliance