EasyManuals Logo

Aeon Labs Z-Stick User Manual

Aeon Labs Z-Stick
5 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
Introduction:
The Aeon Labs Z-Stick is a self-powered Z-Wave USB adapter with remote
network creation capabilities (independent from external power and host
microprocessor). By being able to remotely include/remove Z-Wave devices,
this greatly simplifies Z-Wave network installation. When connected to a host
processor (via USB), it enables the host processor to take part in the Z-Wave
Network.
By taking advantage of the Z-Wave mesh network, commands can be routed
to their destination via intermediary “listening” Z-Wave products. Products that
are Z-Wave certified can be used and communicate with other Z-Wave certified
devices.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Aeon Labs Z-Stick and is the answer not in the manual?

Aeon Labs Z-Stick Specifications

General IconGeneral
Connectivity technologyWireless
Chipset-
InternalNo
Product colorBlack
Data link protocolsZensys 5.02
Maximum data transfer rate480 Mbit/s
USB poweredYes
Wireless range30 m
Channel bandwidth868.42 MHz
Operating temperature (T-T)-35 - 85 °C
Weight and Dimensions IconWeight and Dimensions
Depth69 mm
Width28 mm
Height14 mm

Related product manuals