What to do if my Aeon A310L oximeter cannot be turned on?
If your Aeon Medical Equipment oximeter won't turn on, the batteries may need replacement, so please replace them. Alternatively, the batteries might be installed incorrectly, so please reinstall them. In some cases, the oximeter might be damaged, in which case you should contact your point of purchase.
Why does the screen on my Aeon A310L suddenly turn off?
The screen on your Aeon Medical Equipment might suddenly turn off because the device automatically turns off if no signal is detected for more than 16 seconds; this is a normal process. Alternatively, the batteries may need replacement, so replace them.
What to do if Aeon A310L Medical Equipment oxyhemoglobin or heart rate cannot be shown?
If the oxyhemoglobin or heart rate cannot be shown on your Aeon Medical Equipment, retry by inserting the finger thoroughly. If the issue persists, it could be that the patient’s perfusion is too low to be measured; try a few more times to make sure there is no problem with the product itself. Otherwise seek medical help for exact diagnosis.
How to fix unstable oxyhemoglobin or heart rate readings on Aeon A310L?
If you are getting unstable oxyhemoglobin or heart rate readings on your Aeon Medical Equipment, retry by inserting the finger thoroughly. Also, the finger might be trembling, or the patient's body is moving, so try to help the patient keep calm and still.
What to do if Aeon A310L oxyhemoglobin or heart rate is outside of the standard range?
If the oxyhemoglobin or heart rate is outside of the standard range on your Aeon Medical Equipment, retry by inserting the finger thoroughly. If the issue persists, the patient’s SPO2 & PR may be abnormal, and you should seek medical help for further examination.
General| Brand | Aeon |
|---|---|
| Model | A310L |
| Category | Medical Equipment |
| Language | English |
Provides guidelines for safe operation and user handling of the pulse oximeter.
Highlights critical safety precautions and potential hazards associated with the device.
Explains key terms and symbols used throughout the manual for user understanding.
Describes the purpose and application of the pulse oximeter for specific user groups and environments.
Offers a concise overview of the pulse oximeter's technology and design features.
Lists the key capabilities and functionalities of the A310L Pulse Oximeter for user benefit.
Details factors influencing the lifespan and operational duration of the medical equipment.
Step-by-step instructions for correctly inserting batteries into the pulse oximeter.
Guides users on powering on the device and correctly placing a finger for measurement.
Explains how to interpret the readings displayed on the pulse oximeter screen.
Procedures for routine cleaning of the pulse oximeter's exterior surfaces.
Guidelines for disinfecting the device, especially for multi-patient use.
Covers essential maintenance tasks like battery replacement and storage conditions.
Lists common problems and their corresponding solutions for the pulse oximeter.
To Next Page