INSTRUMENT AND OPERATION
•
Instrument Panel
Oil change indicator：
This indicator at the initial 300 km, then at 1000 km and
every 1000 km thereafter to indicate that the engine oil
should be changed. After changing the engine oil, reset
the oil change indicator.
Pushing ADJ button switches the display between the various
trip meter and odometer modes in the following order: ODO
TRIP A TRIP B; ODO mode pressing "SEL button" more
than 3 seconds oil change indicator will go off.
Trip meter/Odometer
The display in the speedometer has three functions, ODO and TRIP A/ TRIP B.
The trip meter can register the trip distance.
The odometer registers the total distance that the scooter has been ridden.
By pressing "ADJ button" more than 3 seconds to select the odometer (mile or km).
1. Oil change indicator
2. ADJ button
3. ODO
mode
4. SEL button
1
2
3
4
To Next Page
Loading...
Need help?
General
