PREVIOUSLY INSPECTION:
F. Check The Brake Light:
Turn the main switch to “ON” position and hold the front and rear brake level, check the function
G. Signal Light:
Turn the main switch to “ON” position, operate the signal light switch ensure the front and rear
signal light whether working.
H. Spark Plug:
Fouling deposit on the spark plug electrodes and big gap may result incomplete sparking. The
normal gap of electrode is about NGK CR7E 0.7~0.8 mm.
The standard type of spark plug is NGK CR7E .
Spark Plug
Be careful to avoid burn,
because the engine and spark
plug are very hot after stopped.
To Next Page
Loading...
Need help?
General
