EasyManuals Logo

Aeon co-in 125 User Manual

Default Icon
37 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
21
PREVIOUSLY INSPECTION:
Engine Oil Change:
Change the engine oil at first 300km and change it at each 1000km.
Note:
The capacity of engine oil see page 3.
Change Method:
1. Remove the oil gauge.
2. Remove the oil drain screw and draining the oil.
3. (When the engine at warm-up situation,
the engine oil will drain more easily)
4. Remove the cover of oil filter.
5. Clean the drain screw, and reinstall it.
6. Refill the engine oil about 0.9L.
7. Tighten the oil gauge firmly.
8. Warm-up the engine and check the oil level
again after the engine is stopped about one minute.
Drain plug

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Aeon co-in 125 and is the answer not in the manual?

Aeon co-in 125 Specifications

General IconGeneral
BrandAeon
Modelco-in 125
CategoryMotorcycle
LanguageEnglish

Related product manuals