Aeon Overland-180 User Manual

35
Install the dowel pins and camshaft holder.
Tighten the washers and nuts.
Torque: 20 N.m (14.8 lbs.ft)
Adjust the clearance between the rocker arm and valve stem
by applying a feeler gauge.
STANDARD VALVE: 0.08 mm
Relax the cam chain-adjusting bolt with coun-
terclockwise direction and install the o-ring and screw.
Install the cylinder head cover.
CYLINDER HEAD COVER

Aeon Overland-180 Specifications

General

Brand	Aeon
Model	Overland-180
Category	Offroad Vehicle
Language	English