Aeon Overland-180 User Manual

40
Spread each piston ring and remove it by lifting up at a point
opposite the gap.
INSPECTION
Inspect the cylinder walls for scratches or wear.
Measure and record the cylinder I.D. at three levels in both
an X and Y axis. Take the maximum reading to the cylinder
wear.
SERVICE LIMITS: 0.10 mm
Calculate cylinder taper at three levels in an X and Y-axis.
Take the maximum reading to determine the out-of-round.
SERVICE LIMITS: 0.10 mm

Aeon Overland-180 Specifications

General

Brand	Aeon
Model	Overland-180
Category	Offroad Vehicle
Language	English