9.2 Troubleshooting
Bad Brake Performance Brake shoes are worn
Bad brake adjustment
Brake lining are oily, greasy or dirty
Brake drums are worn
Brake arm setting is improperly engage
Vibration or wobble Axle is not tightened well
Bent rim
Axle bearings are worn
Faulty tires
Rear axle bearing holder is faulty
Brake Drag Incorrect brake adjustment
Sticking brake cam
Sticking brake cable
Hard Suspension Bent damper rod
Faulty swing arm pivot bushing
Soft Suspension Wear shock absorber damper
Wear shock absorber spring
9.3 REMOVE REAR WHEEL & REAR BRAKE
Loosen the cotter pin, and wheel nuts, raise the
rear wheel off the ground by placing a support
under the frame.
Release the wheel and wheel hub.
Brake Parts & Location