Need help?Do you have a question about the Aeotec Home Energy Meter Gen5 and is the answer not in the manual?
General| Category | Security Sensors |
|---|---|
| Model | AEOTEC Home Energy Meter Gen5 |
| Frequency | 50/60Hz |
| Communication Protocol | Z-Wave |
| Weight | 200 g |
| Compatibility | Z-Wave |
| Voltage Measurement Range | 100-240V AC |
| Operating Temperature | -10°C to +40°C |
The Home Energy Meter consists of a Main Body and Clamps that attach to your home's circuit box.
Crucial safety guidelines for installation and usage, emphasizing professional electrical work and potential hazards.
Visual guides for installing the Home Energy Meter in USA (2 phases) and EU/AU (1 phase) configurations.
Visual guides for 3-phase, 3-wire and 3-phase, 4-wire installations in EU/AU regions.
Step-by-step instructions for connecting the Home Energy Meter's wires to the main circuit breaker.
Instructions on how to affix the Home Energy Meter to a surface using its backing plate.
Procedure for wirelessly connecting the Home Energy Meter to your primary Z-Wave controller.
Covers removing the meter from Z-Wave, manual reset, and automatic reporting configurations.
Information on obtaining an Excel calculator for configuring the Home Energy Meter.
Guidance on finding advanced configurations in the Engineering Sheet for integration and reference.
Links to other user guides and setup instructions for Aeotec Home Energy Meter models.
To Next Page
