Aeotec Z‐Stick Gen5
Engineering Specifications and Advanced Functions for Developers
(V1.00)
Aeotec Z‐Stick Gen5 is a self‐powered Z‐Wave USB adapter with remote network creation capabilities
(independent from external power and host microprocessor). By being able to remotely include/remove Z‐
Wave devices, this greatly simplifies Z‐Wave network installation. When connected to a host cont roller (via
USB), it enables the host controller to take part in the Z‐Wave Network.
It can be included and operated in any Z‐wave network with other Z‐wave certified devices from other
manufacturers and/or other applications. All non‐battery operated nodes within the network will act as
repeaters re gardless of vendor to increase re liability of the network.
1. Library and Command Classes
1.1 SDK: 6.51.02
1.2 Library
Basic Device Class: BASIC_TYPE_STATIC_CONTROLLER
Generic Device Class: GENERIC_TYPE_STATIC_CONTROLLER
Specific Device Class: SPECIFIC_TYPE_PC_CONTROLLER
2. Technical Specifications
Operating Distance: Up to 500 feet/150 metres outdoors in normal mode or 1310 feet/400
metres outdoors in PA mode.
3. Familiarize Yourself with Your Z‐Stick
3.1 Interface
4. Independence Mode and Serial API‐Mode Functions
4.1 Independence Mode function of Action Button
Button action Description
Click one time
Adding/Including Z‐Wave Device into the Z‐Wave network:
1. Unplug the Z‐Stick from the USB connector and then tap the Action Button. (The blue
LED will blink slowly.)
2. To include a new Z‐Wave device into the network, simply go to the device with the Z‐
To Next Page
Loading...
Need help?
General
