Need help?Do you have a question about the AER Dual mix 2 and is the answer not in the manual?
Describes switchable mic/line combo inputs, gain adjustment, impedance, and signal-to-noise ratio.
Details the Red LED clip indicator and the available headroom.
Explains the stereo auxiliary input via RCA and 3.5mm jack, including level control.
Specifies the unbalanced line output via 6.35mm jack, including voltage and impedance.
Details the stereo headphone jack output power, impedance, and usage warnings.
Describes the balanced XLR DI output, including voltage range, impedance, and noise.
Specifies the low and high frequency equalization ranges and types.
Details the built-in digital effect processor with its four presets.
Explains the 6.35mm stereo jack connector for footswitch functions.
Provides specifications for the 24V power supply and mains adapter.
Covers metal housing, finish, dimensions, and weight of the device.
Summarizes critical safety guidelines to prevent injury, electric shock, and device damage.
Details controls on the top panel including gain, level, effects, and aux in.
Describes rear panel connections for power, phantom power, mute, and outputs.
Details front panel inputs, filter, and headphone/aux connections.
Explains the HPF for exempting low frequencies on inputs and its controls.
Guides on connecting cables, selecting preamps, and powering up the device.
Explains how to set optimal signal levels and gain for undistorted reproduction.
Covers signal sources, preamp selection, dual-band EQ, and multi-effects unit.
Details aux input, master volume control, and DI output functionality.
Explains 24V phantom power operation, switches, and precautions.
General| Channels | 2 |
|---|---|
| Inputs | 2 x XLR/TRS combo |
| EQ | 3-band per channel |
| Phantom Power | +48V |
| Phase Reverse | Per channel |
To Next Page
