To Next PageTo Next Page
Need help?Do you have a question about the AERMEC NRA 1250 and is the answer not in the manual?
Lists available unit models and their standard configurations, including special versions like silenced and heat pump.
Defines operating limits for cold and hot modes and key project data parameters for unit selection.
Explains how to use correction coefficients for cooling and input capacities under various conditions.
Covers calibration of thermomagnetic switches, pressure transducers, and safety control mechanisms.
Details the distribution of weights on rests for units without water, by model and version.
Provides weight distribution data on rests for units with water, broken down by model and version.
Outlines essential safety instructions and procedures for lifting the unit correctly and safely.
Lists available unit models and their standard configurations, including special versions like silenced and heat pump.
Defines operating limits for cold and hot modes and key project data parameters for unit selection.
Explains how to use correction coefficients for cooling and input capacities under various conditions.
Covers calibration of thermomagnetic switches, pressure transducers, and safety control mechanisms.
Details the distribution of weights on rests for units without water, by model and version.
Provides weight distribution data on rests for units with water, broken down by model and version.
Outlines essential safety instructions and procedures for lifting the unit correctly and safely.
General| Max Pressure | 10 bar |
|---|---|
| Voltage | 400 V |
| Frequency | 50 Hz |
| Noise Level | 68 dB(A) |
| Weight | 380 kg |
| Air Delivery | 2.16 m³/min |
| Dimensions | 1200 x 800 x 1200 mm |
