To Next PageTo Next Page
Need help?Do you have a question about the AERMEC Omnia UL Series and is the answer not in the manual?
Describes the selector switch for unit operation and fan speed selection.
Explains how to operate the fancoil, including opening fins for ventilation.
Information on the standard packaging used for shipping the fan coil units.
Instructions and precautions for installing the fancoil unit safely and correctly.
Guidance on electrical connections, safety checks, and cable specifications.
Steps for rotating the battery if required for hydraulic connections.
Advice on room ventilation, temperature regulation, and airflow direction.
Guidelines for cleaning the unit, avoiding hot water, and periodic filter cleaning.
Information on normal operation, potential issues, and operational limits.
Details on starting the fancoil, ventilation speed control, and fin position.
Essential safety checks for electrical connections and component compatibility.
Procedure for rotating the coil unit, including disconnections and reassembly.
Recommendations for airing rooms and setting optimal temperatures for comfort.
Guidance on orienting airflow and safe cleaning practices for the unit.
Instructions for periodic filter cleaning and special deep cleaning procedures.
Describes normal operational phenomena and key operating limits for the unit.
Table detailing the dimensions (A, H, L, Z) and weights of different Omnia UL models.
Specifies the size and type of coil connections for various Omnia UL models.
Provides detailed drawings with measurements for unit layout and component placement.
A table listing dimensions (A, B, C, D, E) for various Omnia UL models.
Explanation of symbols and abbreviations used in the electrical wiring diagrams.
Detailed electrical schematic for the Omnia UL fancoil unit.
General