AERMEC RePuro 170 - RePuro Key Features; High Heat Recovery Efficiency; Minimized Energy Consumption; Advanced Air Quality Features

Aermec RePuro is the innovave soluon which oers air renewal with 90% eciency and its purica-
on at the same me through Plasmacluster, this device is a standard equipment on each unit
Aware of the importance of air renewal and puricaon, AERMEC RePuro, has been designed in order to
oer the best performances compared to the products currently available on the market, we can high-
light:
1 – Very high heat recovery eciency
Caused by the countercurrent air/air exhanger
The “countercurrent exchanger” technology permits to reach recovery eciency greater than 90%. Con-
sequently the fresh air gets in at a very similar temperature to that of the room: this performance is ab-
solutely greater than a tradional recovery mixed ow unit.
2 – Minimized energy consumpon
Caused by inverter driven fans
The employ of high eciency inverter technology, in line with commission regulaon (EU) No 327/2011,
grants the maximum exibility in air ow and avalable stac pressure regulaon for each system. The fans
eciency is already in line with the stated values in commission regulaon of 2015.
3 – High quality of the air
Because of Plasmacluster device
Plasmacluster technology is based on the physical principle of ions generaon which aract the water
molecules of the air creang aggregates called “clusters”. The “clusters” completely surround the danger-
ous microparcles of the room, and consequentely removing their harmful eects on people. This creates
a further ltraon eect compared to the standard mechanical lters currently available on the market.
4 – High availability of accessories
The best tecnology of RePuro involves an high availability of accessories so this unit can be perfectly inte-
grated in each kind of system.
5 – User interface
simple in the ulizaon and elegant shape
All RePuro units are complete with a wall hung user interface with capacive touch LCD screen coming
from the aesthecally pleasing VMF-E4 which won the “Good Design” award in 2010.
6 – Only one system for each comfort need
through the integraon of RePuro with Aermec VMF system
Compared to a stand alone tradional mechanical venlaon system, RePuro has been designed to be
part of (oppure to be integrated in) the VMF system network as the component dedicated to the air re-
newal and puricaon.
Starng from today Aermec oers a complete system which allows to control each need of:
- Heang
- Condioning
- Domesc hot water management
- Air renewal and puricaon
granng the overall best system eciency beyond an opmal result ensured by an unique manufactorer.
ErP
2015
high
eciency