Need help?Do you have a question about the AERMEC RePuro Series and is the answer not in the manual?
Provides critical safety warnings and installation standards for the unit, emphasizing qualified personnel and adherence to legislation.
Explains the product's technical label, detailing model, serial number, and electrical specifications for identification purposes.
Details the procedure for wall-mounting the control panel, including cable connection and low-profile design considerations.
Illustrates compatibility between the wall-mounted control panel and various types of recessed wall boxes.
Details the icons displayed on the control panel and their meanings for user interface interaction.
Describes the function of each touch key on the wall-mounted control panel for operating the unit.
Guides on how to switch the heat recovery unit on and off using the control panel.
Explains how to select between AUTOMATIC and MANUAL operating modes for the heat recovery unit.
Details the procedure for enabling electric heaters for pre or post heating, available in MANUAL mode.
Describes how to navigate between different operating menus and screens on the control panel.
Instructions for setting the supply fan speed (parameter PO1) in manual mode.
Instructions for setting the extract fan speed (parameter PO2) in manual mode.
Procedure to enter the password protected menu using the default password '000' to access settings.
How to set the 'SEASON' parameter (SEA) to select between SUMMER and WINTER operating logics.
Instructions to set the 'HEATING SETPOINT' parameter (SPH) for the maximum temperature limit.
How to set the 'COOLING SETPOINT' parameter (SPC) for the minimum temperature limit.
Procedure to set the 'CLEANING TIME' parameter (CT) for fan operation during automatic mode.
Instructions to set the 'BY-PASS FREECOOLING LOGIC' parameter (BPF) for the freecooling damper.
General| Brand | AERMEC |
|---|---|
| Model | RePuro Series |
| Category | Heating System |
| Language | English |
To Next Page
