Need help?Do you have a question about the AERMEC VED 240 I and is the answer not in the manual?
Safety and installation standards for correct unit setup to avoid risks.
Guidelines for correct installation performed by qualified staff.
Steps to take in case of unit malfunction or anomalous operation.
List of available VED_I fan coil models for 2-pipe and 4-pipe systems.
Features and advantages of the brushless motor and inverter.
Technical data for 2-pipe systems including thermal power and water flow.
Technical data for 4-pipe systems with additional heat exchanger.
Technical data for cooling operation across all system configurations.
Instructions for wall installation, including minimum distance and horizontal placement.
Connecting channels for ducted installation and using the fitting flange.
Using threaded rods for ceiling installation and ensuring horizontal placement.
Critical reminder on maintaining horizontal installation for proper condensate drain.
Ensuring control device compatibility with fan coil electrical features.
Details on 3-way and 2-way motorized water valves.
Overview of available control panels and their characteristics.
Overview of the VMF system and its components.
Management features of the VMF-E18 thermostat, including fan speed and valve control.
Centralized management of hydronic systems, including fan coils, chillers, and boilers.
Input options for external contacts, occupancy sensors, and local serial devices.
Condensate drain device with a pump for exceeding level differences.
Plenum with motorized dampers for air flow regulation.
Safety and installation standards for correct unit setup to avoid risks.
Guidelines for correct installation performed by qualified staff.
Steps to take in case of unit malfunction or anomalous operation.
List of available VED_I fan coil models for 2-pipe and 4-pipe systems.
Features and advantages of the brushless motor and inverter.
Technical data for 2-pipe systems including thermal power and water flow.
Technical data for 4-pipe systems with additional heat exchanger.
Technical data for cooling operation across all system configurations.
Instructions for wall installation, including minimum distance and horizontal placement.
Connecting channels for ducted installation and using the fitting flange.
Using threaded rods for ceiling installation and ensuring horizontal placement.
Critical reminder on maintaining horizontal installation for proper condensate drain.
Ensuring control device compatibility with fan coil electrical features.
Details on 3-way and 2-way motorized water valves.
Overview of available control panels and their characteristics.
Overview of the VMF system and its components.
Management features of the VMF-E18 thermostat, including fan speed and valve control.
Centralized management of hydronic systems, including fan coils, chillers, and boilers.
Input options for external contacts, occupancy sensors, and local serial devices.
Condensate drain device with a pump for exceeding level differences.
Plenum with motorized dampers for air flow regulation.
General| Brand | AERMEC |
|---|---|
| Model | VED 240 I |
| Category | Air Conditioner |
| Language | English |
To Next Page