Need help?Do you have a question about the AERMEC VED 530 I and is the answer not in the manual?
Information on safe handling and transport of the unit, including warnings and pictograms.
Explanation of safety pictograms used throughout the manual.
Instructions for correct installation, requiring qualified personnel and adherence to standards.
Guidelines for operating the fan coil, including filter use and normal sounds.
Importance and procedure for regular filter cleaning for efficient operation.
Procedure for deep cleaning involving fan auger removal, for qualified personnel.
Instructions for handling anomalies and contacting service.
Technical data for 2-pipe systems for various models.
Technical data for 4-pipe systems with additional heat exchanger for various models.
Technical data for cold operation across all system configurations for various models.
Corrective factors for total cooling capacity based on speed and model.
Corrective factors for sensitive cooling capacity based on speed and model.
Corrective factors for thermal power in 2-pipe systems based on speed.
Pressure drop curves for 2-pipe systems in heating mode.
Pressure drop curves for 4-pipe systems in heating mode.
Flow static pressure curves for specific VED models at different voltage settings.
Flow static pressure curves for specific VED models at different voltage settings.
Flow static pressure curves for specific VED models at different voltage settings.
Correction factors for glycol water at 10% in cooling and heating modes.
Correction factors for glycol water at 20% in cooling and heating modes.
Correction factors for glycol water at 35% in cooling and heating modes.
Information on safe handling and transport of the unit, including warnings and pictograms.
Explanation of safety pictograms used throughout the manual.
Instructions for correct installation, requiring qualified personnel and adherence to standards.
Guidelines for operating the fan coil, including filter use and normal sounds.
Importance and procedure for regular filter cleaning for efficient operation.
Procedure for deep cleaning involving fan auger removal, for qualified personnel.
Instructions for handling anomalies and contacting service.
Technical data for 2-pipe systems for various models.
Technical data for 4-pipe systems with additional heat exchanger for various models.
Technical data for cold operation across all system configurations for various models.
Corrective factors for total cooling capacity based on speed and model.
Corrective factors for sensitive cooling capacity based on speed and model.
Corrective factors for thermal power in 2-pipe systems based on speed.
Pressure drop curves for 2-pipe systems in heating mode.
Pressure drop curves for 4-pipe systems in heating mode.
Flow static pressure curves for specific VED models at different voltage settings.
Flow static pressure curves for specific VED models at different voltage settings.
Flow static pressure curves for specific VED models at different voltage settings.
Correction factors for glycol water at 10% in cooling and heating modes.
Correction factors for glycol water at 20% in cooling and heating modes.
Correction factors for glycol water at 35% in cooling and heating modes.
General| Brand | AERMEC |
|---|---|
| Model | VED 530 I |
| Category | Air Conditioner |
| Language | English |
To Next Page