14
ACTIVATING/DEACTIVATING THE ANTI-FREEZE FUNCTION
In the event that is sought to keep a safety temperature du-
ring winter (e.g. a prolonged absence in the place where the
unit is installed) the unit has the anti-freeze function, where it
keeps the room temperature within the 8°C (during heating
mode); while pressing the buttons
and the function
activates and the icon ( ) shows in the display; in order to
deactivate the function press the buttons
and at the
same time.
NOTE:
The function uses the set chose by the user, and guarante-
es a higher comfort if the remote controller is placed near
the user (within the maximum distance of 8 meters).
During this function is it recommended to keep the remo-
te away from heating sources that could change the real
room temperature reading
Setting the anti-
freeze function
ACTIVATING/DEACTIVATING THE IFEEL FUNCTION
The IFEEL function uses a temperature probe inside the infra-
red remote control in order to comunicate the room tempe-
rature to the unit and therefore it sets the operation of the
unit, to give the maximum comfort to the user.
While the unit is on, press at the same time the buttons
and to activate and deactivate this function; the display
will show or hide the icon ( ), to indicate whether the fun-
ction is activated or deactivated.
Setting the
IFEEL function
To Next Page
Loading...
