Aerocool PROJECT 7 Series - Install I;O Panel Guide; LED Functionality Explained

6 7
Accessory Bag Contents
WHAT’S IN THE BOX - Tempered Glass Version
PWM Hub x 1
3.5” HDD Screw x 8
Motherboard Standoff x 6
4-Pin Male Connectors x 2
(Connects to most LED strips. Note: Included LED strip does NOT require this connector)
MB Connector x 1
PSU Connector 4Pin x 1
39cm
40cm
3.5cm
6.5cm
LED Strip x 1
39cm39cm2cm
LED 4 Pin Connector (for LED Strip)
Connects Aerocool’s LED strip to light up the case
Motherboard/SSD/ODD Screw
PSU/ PCI Screw
x 25
x 8
4 Pin RGB Connector x 2
Connect and control RGB LED fans
(Available inside Case connected to I/O Panel)
WHAT’S IN THE BOX - Standard Version
3.5” HDD Screw x 8
Motherboard Standoff x 6
Motherboard/SSD/ODD Screw
PSU/ PCI Screw
x 25
x 8
Velcro x 4
16cm
PWM Hub x 1
MB Connector x 1
PSU Connector 4Pin x 1
39cm
40cm
4 Pin RGB Connector x 2
Connect and control RGB LED fans
(Available inside Case connected to I/O Panel)
3.5cm
6.5cm
4-Pin Male Connectors x 2
(Connects to most LED strips. Note: LED Strip NOT included)
Velcro x 4
16cm