EasyManua.ls Logo

Aeroe Spider Cradle User Manual

Default Icon
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Thanks for choosing
We hope that this is the start of a long and happy relationship that will enable you to use your bike
more often, for more adventures in an easier and more enjoyable way.
If you’re like us and tend to skip the instructions and just start putting it together. . . . . . we understand.
However if you would like some help getting set up, below are some important and handy tips and
tricks for installing your aeroe gear.
All you need to install any of our products is a standard 5mm allen key. Take a moment to familiarise
yourself with some of the jargon below shown on the handle bar cradle. The following steps will then
allow you to get setup quickly and easily so you can get out and start enjoying your new gear!
Tool required for install - ‘5mm allen key
handlebar cradle ‘feet
and ‘straps to connect
to handlebar
In built ‘cradle
straps’ for easy use.
handle bar cradle
We love seeing and hearing about your
adventures around the world. . . . . . if you
want to reach out or still need installation
help - we would love to hear from you!
You can reach us at
team@aeroe.com or on facebook and
instagram #aeroebikepack or check out
aeroe.com for more information.
Thanks again from the aeroe team!
image: nzcycling journal
Question and Answer IconNeed help?

Do you have a question about the Aeroe Spider Cradle and is the answer not in the manual?

Aeroe Spider Cradle Specifications

General IconGeneral
BrandAeroe
ModelSpider Cradle
CategoryBicycle Accessories
LanguageEnglish

Summary

Aeroe Gear Installation Guide

Welcome and Installation Overview

Introduction to aeroe gear, offering tips and tricks for easy setup and enjoyable adventures.

Install Handlebar Cradle

Prepare and Position Cradle

Unscrew bolts, use tape if needed, and position straps around the handlebar for initial fit.

Tighten Cradle Straps

Tighten straps sequentially to 75% for stability, then to 100% (max 4Nm) for a secure fit.

Adjust Cradle Position

Fine-tune cradle position by re-loosening and adjusting bolts for optimal fit and tightness.

Cradle Ready for Load

Cradle is installed and ready for a bag, supporting a maximum load of 5kg.

Attach Bag to Cradle

Secure Your Bag

Place your bag in the cradle and connect the straps securely, tidying any excess strap.

Utilize Aeroe Dry Bags

Use aeroe dry bags with eyelets for enhanced security. Review strap tips for stability.

Related product manuals