- 3 -
17. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
18. Put your feet on the side rail before using the treadmill, and always attach the safety key rope to your
clothing. Hold the handle bar before the running belt moving well (feel the running speed by your single
foot before using it). To avoid losing balance, please slow down the speed to the lowest or take off the
safety lock. And hold the handle bar to jump to the side rails when emergency or the safety key is not
attached.
ASSEMBLY STEPS
STEP 1:
1. Open the packing box, take out the above materials from the box, and lay the main frame on the
ground.
STEP 2:
1. Connect the computer lower wire (86) and computer connecting wire (85)
2.Lock the upright tube (2L/R) on the main frame(1)with inner hexagonal head bolts (46)、internal
serrated locking washer(72),don’t lock the inner hexagonal head bolts (46)now.
To Next Page
Loading...