Use this menu to change the language of your FlexiSmart user interface.
This menu item allows temperature measurement correction.
In case the room temperature being measured by the built-in sensor of the
AeroFlow® heater deviates from the real room temperature, a compensation
value can be set.
Use the arrow buttons to select one of the available
languages. Confirm with OK.
If for instance the indicates a lower AeroFlow® heater
temperature, use the arrow buttons to increase the
value of compensation. Example:
• Room temperature = 21°C
• Displayed temperature = 20°C
• Set +1 and confirm with OK.
Language
Language
Sensor probe Offset
English
+ 1.0
Sensor probe Offset
+
-
Select the current weekday and confirm with OK.
Use the arrow buttons to set the current hour. Confirm
with OK. After this, set the current minute and confirm
with OK as well.
Set the time
Set the time
09:00
Select day
Monday
The return temperature is the temperature that should
begin on your return.
If program is active (menu "Configuration" → Programs =
ON), the return temperature can not be selected. After
reaching the return time the heating plan will be
continued. If no time frame is active (paused heating
between two time frames), the Antifreeze temperature is
applied. So the heating plan continues as programmed.
If program is disabled, you can use the arrow keys to set
the return temperature. Confirm with OK. The status
display with the suitcase icon and the number of re-
maining days off will appear. The absence temperature
corresponds to the Antifreeze temperature.
To change the temperature for your absence, press an ar-
row key in the status display. The Temperature-overview
display appears. Change the absence temperature with
the arrow keys and confirm with OK. To deactivate the
holiday mode set "days out" to "-" (not "0"). During holi-
day mode you can change the Antifreeze temperature in
the Antifreeze menu, but this will not be applied for the
current absence.
Return temperature:
15.0°C
15
To Next Page
Loading...
